Retrotec DM-2A Manual de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
Page 69 of 72
©Retrotec Inc. 2012
Appendix F: Setting up for a test with Alaska’s AkWarm
software
1. Press [Setup] to enter the Setup menu
2. Press [] or [] to scroll through the list until Mode Setup is highlighted
3. Press [Enter] to enter the Mode Setup submenu
4. Press [] or [] to scroll until Pressure is highlighted.
5. Press [] or [] to scroll until Pa is displayed
6. Press []to highlight Flow
7. Press [] or []to scroll until “CFM is displayed
8. Press [] once to highlight EqLA
9. Use [] or [] to scroll until in
2
” or” ft
2
is displayed (this is an optional measurement
forAlaska AkWarm)
10. Press [] once to highlight Air Change
11. Use [] or [] to scroll until On is displayed (this is an optional measurement for Alaska
AkWarm)
12. Scroll down to all other results in the Mode Setup menu, and use [] or [] to scroll until
“Off” is displayed to disable all other results.
13. Press [Exit] once to return to the Setup submenu
14. Press [] to select n
15. Press [Enter]
16. Use the keypad to set this value to “0.65
17. Press [Enter] to accept this value
18. Press [] to select Power Down Hour
19. Leave at 2 (hours) or set to 0 to turn auto-power-down off.
20. Press [] to select Surface Area Unit
21. Press [] or [] to set to ft
2
(Note: AKWarm does not require the use of this parameter)
22. Press [] to select Building Volume Unit
23. Press [] or [] to set to ft
3
(Note: when you select Air Changes, you will enter volume
in ft
3
)
24. Press [] to select European , Separator
25. Press [] or [] to set to No
26. Press [] to select Sig Figs
27. Press [] or [] to set to 3.5
28. Press [Exit] to exit the Setup menu and save these Setup choices.
Your gauge is now set up for performing an Air Leakage Test with Alaska’s AKWarm Software.
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72

Comentarios a estos manuales

Sin comentarios